pyemma.msm.SampledMSM¶

class pyemma.msm.SampledMSM(samples, ref=None, conf=0.95)¶

Sampled Markov state model

__init__(samples, ref=None, conf=0.95)¶

Constructs a sampled MSM

Parameters:	samples (list of MSM) – Sampled MSM objects ref (obj of type `pyemma.msm.MaximumLikelihoodMSM` or `pyemma.msm.BayesianMSM`) – Single-point estimator, e.g. containing a maximum likelihood or mean MSM conf (float, optional, default=0.95) – Confidence interval. By default two-sigma (95.4%) is used. Use 95.4% for two sigma or 99.7% for three sigma.

Methods

__init__(samples[, ref, conf]) Constructs a sampled MSM

committor_backward(A, B) Backward committor from set A to set B

committor_forward(A, B) Forward committor (also known as p_fold or splitting probability) from set A to set B

correlation(a[, b, maxtime, k, ncv]) Time-correlation for equilibrium experiment.

eigenvalues([k]) Compute the transition matrix eigenvalues

eigenvectors_left([k]) Compute the left transition matrix eigenvectors

eigenvectors_right([k]) Compute the right transition matrix eigenvectors

expectation(a) Equilibrium expectation value of a given observable.

fingerprint_correlation(a[, b, k, ncv]) Dynamical fingerprint for equilibrium time-correlation experiment.

fingerprint_relaxation(p0, a[, k, ncv]) Dynamical fingerprint for perturbation/relaxation experiment.

get_model_params([deep]) Get parameters for this model.

mfpt(A, B) Mean first passage times from set A to set B, in units of the input trajectory time step

pcca(m) Runs PCCA++ [1]_ to compute a metastable decomposition of MSM states

propagate(p0, k) Propagates the initial distribution p0 k times

relaxation(p0, a[, maxtime, k, ncv]) Simulates a perturbation-relaxation experiment.

sample_conf(f, *args, **kwargs) Sample confidence interval of numerical method f over all samples

sample_f(f, *args, **kwargs) Evaluated method f for all samples

sample_mean(f, *args, **kwargs) Sample mean of numerical method f over all samples

sample_std(f, *args, **kwargs) Sample standard deviation of numerical method f over all samples

set_model_params([samples, conf, P, pi, ...])

param samples:	sampled MSMs

simulate(N[, start, stop, dt]) Generates a realization of the Markov Model

timescales([k]) The relaxation timescales corresponding to the eigenvalues

update_model_params(**params) Update given model parameter if they are set to specific values

Attributes

`P`	The transition matrix on the active set.
`dt_model`
`is_reversible`	Returns whether the MSM is reversible
`is_sparse`	Returns whether the MSM is sparse
`metastable_assignments`	Assignment of states to metastable sets using PCCA++
`metastable_distributions`	Probability of metastable states to visit an MSM state by PCCA++
`metastable_memberships`	Probabilities of MSM states to belong to a metastable state by PCCA++
`metastable_sets`	Metastable sets using PCCA++
`neig`	number of eigenvalues to compute.
`nstates`	Number of active states on which all computations and estimations are done
`pi`
`reversible`	Returns whether the MSM is reversible
`sparse`	Returns whether the MSM is sparse
`stationary_distribution`
`timestep_model`	Physical time corresponding to one transition matrix step, e.g.
`transition_matrix`	The transition matrix on the active set.

P¶: The transition matrix on the active set.

committor_backward(A, B)¶

Backward committor from set A to set B

Parameters:	A (int or int array) – set of starting states B (int or int array) – set of target states

committor_forward(A, B)¶

Forward committor (also known as p_fold or splitting probability) from set A to set B

Parameters:	A (int or int array) – set of starting states B (int or int array) – set of target states

correlation(a, b=None, maxtime=None, k=None, ncv=None)¶

Time-correlation for equilibrium experiment.

In order to simulate a time-correlation experiment (e.g. fluorescence correlation spectroscopy [NDD11], dynamical neutron scattering [LYP13], ...), first compute the mean values of your experimental observable \(a\) by MSM state:

\[a_i = \frac{1}{N_i} \sum_{x_t \in S_i} f(x_t)\]

where \(S_i\) is the set of configurations belonging to MSM state \(i\) and \(f()\) is a function that computes the experimental observable of interest for configuration \(x_t\). If a cross-correlation function is wanted, also apply the above computation to a second experimental observable \(b\).

Then the accurate (i.e. without statistical error) autocorrelation function of \(f(x_t)\) given the Markov model is computed by correlation(a), and the accurate cross-correlation function is computed by correlation(a,b). This is done by evaluating the equation

\[\begin{split}acf_a(k\tau) &= \mathbf{a}^\top \mathrm{diag}(\boldsymbol{\pi}) \mathbf{P(\tau)}^k \mathbf{a} \\ ccf_{a,b}(k\tau) &= \mathbf{a}^\top \mathrm{diag}(\boldsymbol{\pi}) \mathbf{P(\tau)}^k \mathbf{b}\end{split}\]

where \(acf\) stands for autocorrelation function and \(ccf\) stands for cross-correlation function, \(\mathbf{P(\tau)}\) is the transition matrix at lag time \(\tau\), \(\boldsymbol{\pi}\) is the equilibrium distribution of \(\mathbf{P}\), and \(k\) is the time index.

Note that instead of using this method you could generate a long synthetic trajectory from the MSM and then estimating the time-correlation of your observable(s) directly from this trajectory. However, there is no reason to do this because the present method does that calculation without any sampling, and only in the limit of an infinitely long synthetic trajectory the two results will agree exactly. The correlation function computed by the present method still has statistical uncertainty from the fact that the underlying MSM transition matrix has statistical uncertainty when being estimated from data, but there is no additional (and unnecessary) uncertainty due to synthetic trajectory generation.

Parameters:

a ((n,) ndarray) – Observable, represented as vector on state space
maxtime (int or float) – Maximum time (in units of the input trajectory time step) until which the correlation function will be evaluated. Internally, the correlation function can only be computed in integer multiples of the Markov model lag time, and therefore the actual last time point will be computed at \(\mathrm{ceil}(\mathrm{maxtime} / \tau)\) By default (None), the maxtime will be set equal to the 5 times the slowest relaxation time of the MSM, because after this time the signal is almost constant.
b ((n,) ndarray (optional)) – Second observable, for cross-correlations
k (int (optional)) – Number of eigenvalues and eigenvectors to use for computation. This option is only relevant for sparse matrices and long times for which an eigenvalue decomposition will be done instead of using the matrix power.
ncv (int (optional)) – Only relevant for sparse matrices and large lag times where the relaxation will be computed using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k.

Returns:

times (ndarray (N)) – Time points (in units of the input trajectory time step) at which the correlation has been computed
correlations (ndarray (N)) – Correlation values at given times

Examples

This example computes the autocorrelation function of a simple observable on a three-state Markov model and plots the result using matplotlib:

>>> import numpy as np
>>> import pyemma.msm as msm
>>>
>>> P = np.array([[0.99, 0.01, 0], [0.01, 0.9, 0.09], [0, 0.1, 0.9]])
>>> a = np.array([0.0, 0.5, 1.0])
>>> M = msm.markov_model(P)
>>> times, acf = M.correlation(a)
>>>
>>> import matplotlib.pylab as plt
>>> plt.plot(times, acf)  

References

[NDD11]

Noe, F., S. Doose, I. Daidone, M. Loellmann, J. D. Chodera, M. Sauer and J. C. Smith. 2011 Dynamical fingerprints for probing individual relaxation processes in biomolecular dynamics with simulations and kinetic experiments. Proc. Natl. Acad. Sci. USA 108, 4822-4827.

[LYP13]

Lindner, B., Z. Yi, J.-H. Prinz, J. C. Smith and F. Noe. 2013. Dynamic Neutron Scattering from Conformational Dynamics I: Theory and Markov models. J. Chem. Phys. 139, 175101.

eigenvalues(k=None)¶

Compute the transition matrix eigenvalues

Parameters:	k (int) – number of eigenvalues to be returned. By default will return all available eigenvalues
Returns:	ts – transition matrix eigenvalues \(\lambda_i, i = 1, ..., k\)., sorted by descending norm.
Return type:	ndarray(k,)

eigenvectors_left(k=None)¶

Compute the left transition matrix eigenvectors

Parameters:	k (int) – number of eigenvectors to be returned. By default all available eigenvectors.
Returns:	L – left eigenvectors in a row matrix. l_ij is the j’th component of the i’th left eigenvector
Return type:	ndarray(k,n)

eigenvectors_right(k=None)¶

Compute the right transition matrix eigenvectors

Parameters:	k (int) – number of eigenvectors to be computed. By default all available eigenvectors.
Returns:	R – right eigenvectors in a column matrix. r_ij is the i’th component of the j’th right eigenvector
Return type:	ndarray(n,k)

expectation(a)¶

Equilibrium expectation value of a given observable.

Parameters:	a ((n,) ndarray) – Observable vector on the MSM state space
Returns:	val – Equilibrium expectation value fo the given observable
Return type:	float

Notes

The equilibrium expectation value of an observable \(a\) is defined as follows

\[\mathbb{E}_{\mu}[a] = \sum_i \pi_i a_i\]

\(\pi=(\pi_i)\) is the stationary vector of the transition matrix \(P\).

fingerprint_correlation(a, b=None, k=None, ncv=None)¶

Dynamical fingerprint for equilibrium time-correlation experiment.

Parameters:

a ((n,) ndarray) – Observable, represented as vector on MSM state space
b ((n,) ndarray, optional) – Second observable, for cross-correlations
k (int, optional) – Number of eigenvalues and eigenvectors to use for computation. This option is only relevant for sparse matrices and long times for which an eigenvalue decomposition will be done instead of using the matrix power
ncv (int, optional) – Only relevant for sparse matrices and large lag times, where the relaxation will be computed using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k

Returns:

timescales ((k,) ndarray) – Time-scales (in units of the input trajectory time step) of the transition matrix
amplitudes ((k,) ndarray) – Amplitudes for the correlation experiment

References

Spectral densities are commonly used in spectroscopy. Dynamical fingerprints are a useful representation for computational spectroscopy results and have been introduced in [NDD11].

[NDD11]

Noe, F, S Doose, I Daidone, M Loellmann, M Sauer, J D Chodera and J Smith. 2010. Dynamical fingerprints for probing individual relaxation processes in biomolecular dynamics with simulations and kinetic experiments. PNAS 108 (12): 4822-4827.

fingerprint_relaxation(p0, a, k=None, ncv=None)¶

Dynamical fingerprint for perturbation/relaxation experiment.

Parameters:

p0 ((n,) ndarray) – Initial distribution for a relaxation experiment
a ((n,) ndarray) – Observable, represented as vector on state space
k (int, optional) – Number of eigenvalues and eigenvectors to use for computation
ncv (int, optional) – Only relevant for sparse matrices and large lag times, where the relaxation will be computes using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k

Returns:

timescales ((k,) ndarray) – Time-scales (in units of the input trajectory time step) of the transition matrix
amplitudes ((k,) ndarray) – Amplitudes for the relaxation experiment

References

Spectral densities are commonly used in spectroscopy. Dynamical fingerprints are a useful representation for computational spectroscopy results and have been introduced in [NDD11].

[NDD11]

Noe, F, S Doose, I Daidone, M Loellmann, M Sauer, J D Chodera and J Smith. 2010. Dynamical fingerprints for probing individual relaxation processes in biomolecular dynamics with simulations and kinetic experiments. PNAS 108 (12): 4822-4827.

get_model_params(deep=True)¶

Get parameters for this model.

Parameters:	deep (boolean, optional) – If True, will return the parameters for this estimator and contained subobjects that are estimators.
Returns:	params – Parameter names mapped to their values.
Return type:	mapping of string to any

is_reversible¶: Returns whether the MSM is reversible

is_sparse¶: Returns whether the MSM is sparse

metastable_assignments¶

Assignment of states to metastable sets using PCCA++

Computes the assignment to metastable sets for active set states using the PCCA++ method [1]_. pcca() needs to be called first to make this attribute available.

This is only recommended for visualization purposes. You cannot compute any actual quantity of the coarse-grained kinetics without employing the fuzzy memberships!

Returns:	assignments – For each MSM state, the metastable state it is located in.
Return type:	ndarray (n,)

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

metastable_distributions¶

Probability of metastable states to visit an MSM state by PCCA++

Computes the probability distributions of active set states within each metastable set by combining the the PCCA++ method [1]_ with Bayesian inversion as described in [2].

pcca() needs to be called first to make this attribute available.

Returns:	p_out – A matrix containing the probability distribution of each active set state, given that we are in one of the m metastable sets, i.e. p(state \| metastable). The row sums of p_out are 1.
Return type:	ndarray (m,n)

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7, 147-179.

[2]	F. Noe, H. Wu, J.-H. Prinz and N. Plattner. 2013. Projected and hidden Markov models for calculating kinetics and metastable states of complex molecules J. Chem. Phys. 139, 184114.

metastable_memberships¶

Probabilities of MSM states to belong to a metastable state by PCCA++

Computes the memberships of active set states to metastable sets with the PCCA++ method [1]_.

pcca() needs to be called first to make this attribute available.

Returns:	M – A matrix containing the probability or membership of each state to be assigned to each metastable set, i.e. p(metastable \| state). The row sums of M are 1.
Return type:	ndarray((n,m))

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

metastable_sets¶

Metastable sets using PCCA++

Computes the metastable sets of active set states within each metastable set using the PCCA++ method [1]_. pcca() needs to be called first to make this attribute available.

This is only recommended for visualization purposes. You cannot compute any actual quantity of the coarse-grained kinetics without employing the fuzzy memberships!

Returns:	sets – A list of length equal to metastable states. Each element is an array with microstate indexes contained in it
Return type:	list of ndarray

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

mfpt(A, B)¶

Mean first passage times from set A to set B, in units of the input trajectory time step

Parameters:	A (int or int array) – set of starting states B (int or int array) – set of target states

neig¶: number of eigenvalues to compute.

nstates¶: Number of active states on which all computations and estimations are done

pcca(m)¶

Runs PCCA++ [1]_ to compute a metastable decomposition of MSM states

After calling this method you can access metastable_memberships(), metastable_distributions(), metastable_sets() and metastable_assignments().

Parameters:	m (int) – Number of metastable sets
Returns:	pcca_obj – An object containing all PCCA quantities. However, you can also ignore this return value and instead retrieve the quantities of your interest with the following MSM functions: `metastable_memberships()`, `metastable_distributions()`, `metastable_sets()` and `metastable_assignments()`.
Return type:	`PCCA`

Notes

If you coarse grain with PCCA++, the order of the obtained memberships might not be preserved. This also applies for metastable_memberships(), metastable_distributions(), metastable_sets(), metastable_assignments()

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

propagate(p0, k)¶

Propagates the initial distribution p0 k times

Computes the product

\[p_k = p_0^T P^k\]

If the lag time of transition matrix \(P\) is \(\tau\), this will provide the probability distribution at time \(k \tau\).

Parameters:	p0 (ndarray(n,)) – Initial distribution. Vector of size of the active set. k (int) – Number of time steps
Returns:	pk – Distribution after k steps. Vector of size of the active set.
Return type:	ndarray(n,)

relaxation(p0, a, maxtime=None, k=None, ncv=None)¶

Simulates a perturbation-relaxation experiment.

In perturbation-relaxation experiments such as temperature-jump, pH-jump, pressure jump or rapid mixing experiments, an ensemble of molecules is initially prepared in an off-equilibrium distribution and the expectation value of some experimental observable is then followed over time as the ensemble relaxes towards equilibrium.

In order to simulate such an experiment, first determine the distribution of states at which the experiment is started, \(p_0\) and compute the mean values of your experimental observable \(a\) by MSM state:

\[a_i = \frac{1}{N_i} \sum_{x_t \in S_i} f(x_t)\]

where \(S_i\) is the set of configurations belonging to MSM state \(i\) and \(f()\) is a function that computes the experimental observable of interest for configuration \(x_t\).

Then the accurate (i.e. without statistical error) time-dependent expectation value of \(f(x_t)\) given the Markov model is computed by relaxation(p0, a). This is done by evaluating the equation

\[E_a(k\tau) = \mathbf{p_0}^{\top} \mathbf{P(\tau)}^k \mathbf{a}\]

where \(E\) stands for the expectation value that relaxes to its equilibrium value that is identical to expectation(a), \(\mathbf{P(\tau)}\) is the transition matrix at lag time \(\tau\), \(\boldsymbol{\pi}\) is the equilibrium distribution of \(\mathbf{P}\), and \(k\) is the time index.

Note that instead of using this method you could generate many synthetic trajectory from the MSM with starting points drawn from the initial distribution and then estimating the time-dependent expectation value by an ensemble average. However, there is no reason to do this because the present method does that calculation without any sampling, and only in the limit of an infinitely many trajectories the two results will agree exactly. The relaxation function computed by the present method still has statistical uncertainty from the fact that the underlying MSM transition matrix has statistical uncertainty when being estimated from data, but there is no additional (and unnecessary) uncertainty due to synthetic trajectory generation.

Parameters:

p0 ((n,) ndarray) – Initial distribution for a relaxation experiment
a ((n,) ndarray) – Observable, represented as vector on state space
maxtime (int or float, optional) – Maximum time (in units of the input trajectory time step) until which the correlation function will be evaluated. Internally, the correlation function can only be computed in integer multiples of the Markov model lag time, and therefore the actual last time point will be computed at \(\mathrm{ceil}(\mathrm{maxtime} / \tau)\). By default (None), the maxtime will be set equal to the 5 times the slowest relaxation time of the MSM, because after this time the signal is constant.
k (int (optional)) – Number of eigenvalues and eigenvectors to use for computation
ncv (int (optional)) – Only relevant for sparse matrices and large lag times, where the relaxation will be computes using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k

Returns:

times (ndarray (N)) – Time points (in units of the input trajectory time step) at which the relaxation has been computed
res (ndarray) – Array of expectation value at given times

reversible¶: Returns whether the MSM is reversible

sample_conf(f, *args, **kwargs)¶

Sample confidence interval of numerical method f over all samples

Calls f(*args, **kwargs) on all samples and computes the confidence interval. Size of confidence interval is given in the construction of the SampledModel. f must return a numerical value or an ndarray.

Parameters:

f (method reference or name (str)) – Model method to be evaluated for each model sample
args (arguments) – Non-keyword arguments to be passed to the method in each call
kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call

Returns:

L (float or ndarray) – lower value or array of confidence interval
R (float or ndarray) – upper value or array of confidence interval

sample_f(f, *args, **kwargs)¶

Evaluated method f for all samples

Calls f(*args, **kwargs) on all samples.

Parameters:	f (method reference or name (str)) – Model method to be evaluated for each model sample args (arguments) – Non-keyword arguments to be passed to the method in each call kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call
Returns:	vals – list of results of the method calls
Return type:	list

sample_mean(f, *args, **kwargs)¶

Sample mean of numerical method f over all samples

Calls f(*args, **kwargs) on all samples and computes the mean. f must return a numerical value or an ndarray.

Parameters:	f (method reference or name (str)) – Model method to be evaluated for each model sample args (arguments) – Non-keyword arguments to be passed to the method in each call kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call
Returns:	mean – mean value or mean array
Return type:	float or ndarray

sample_std(f, *args, **kwargs)¶

Sample standard deviation of numerical method f over all samples

Calls f(*args, **kwargs) on all samples and computes the standard deviation. f must return a numerical value or an ndarray.

Parameters:	f (method reference or name (str)) – Model method to be evaluated for each model sample args (arguments) – Non-keyword arguments to be passed to the method in each call kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call
Returns:	std – standard deviation or array of standard deviations
Return type:	float or ndarray

set_model_params(samples=None, conf=0.95, P=None, pi=None, reversible=None, dt_model='1 step', neig=None)¶

Parameters:	samples (list of MSM objects) – sampled MSMs conf (float, optional, default=0.68) – Confidence interval. By default one-sigma (68.3%) is used. Use 95.4% for two sigma or 99.7% for three sigma.

simulate(N, start=None, stop=None, dt=1)¶

Generates a realization of the Markov Model

Parameters:	N (int) – trajectory length in steps of the lag time start (int, optional, default = None) – starting hidden state. If not given, will sample from the stationary distribution of the hidden transition matrix. stop (int or int-array-like, optional, default = None) – stopping hidden set. If given, the trajectory will be stopped before N steps once a hidden state of the stop set is reached dt (int) – trajectory will be saved every dt time steps. Internally, the dt’th power of P is taken to ensure a more efficient simulation.
Returns:	htraj – The state trajectory with length N/dt
Return type:	(N/dt, ) ndarray

sparse¶: Returns whether the MSM is sparse

timescales(k=None)¶

The relaxation timescales corresponding to the eigenvalues

Parameters:	k (int) – number of timescales to be returned. By default all available eigenvalues, minus 1.
Returns:	ts – relaxation timescales in units of the input trajectory time step, defined by \(-\tau / ln \| \lambda_i \|, i = 2,...,k+1\).
Return type:	ndarray(m)

timestep_model¶: Physical time corresponding to one transition matrix step, e.g. ‘10 ps’

transition_matrix¶: The transition matrix on the active set.

update_model_params(**params)¶: Update given model parameter if they are set to specific values