pyemma.msm.BayesianMSM¶

class pyemma.msm.BayesianMSM(lag=1, nsamples=100, nsteps=None, reversible=True, statdist_constraint=None, count_mode='effective', sparse=False, connectivity='largest', dt_traj='1 step', conf=0.95, show_progress=True)¶

Bayesian Markov state model estimator

__init__(lag=1, nsamples=100, nsteps=None, reversible=True, statdist_constraint=None, count_mode='effective', sparse=False, connectivity='largest', dt_traj='1 step', conf=0.95, show_progress=True)¶

Bayesian estimator for MSMs given discrete trajectory statistics

Parameters:

lag (int, optional, default=1) – lagtime to estimate the HMSM at
nsamples (int, optional, default=100) – number of sampled transition matrices used
nsteps (int, optional, default=None) – number of Gibbs sampling steps for each transition matrix used. If None, nstep will be determined automatically
reversible (bool, optional, default = True) – If true compute reversible MSM, else non-reversible MSM
statdist_constraint ((M,) ndarray optional) – Stationary vector on the full set of states. Assign zero stationary probabilities to states for which the stationary vector is unknown. Estimation will be made such that the resulting ensemble of transition matrices is defined on the intersection of the states with positive stationary vector and the largest connected set (undirected).
count_mode (str, optional, default='effective') –
mode to obtain count matrices from discrete trajectories. Should be one of:
- ‘sliding’ : A trajectory of length T will have \(T-\tau\) counts at time indexes .. math:: (0 rightarray tau), (1 rightarray tau+1), ..., (T-tau-1 rightarray T-1)
- ‘effective’ : Uses an estimate of the transition counts that are statistically uncorrelated. Recommended when used with a Bayesian MSM.
- ‘sample’ : A trajectory of length T will have \(T / \tau\) counts at time indexes .. math:: (0 rightarray tau), (tau rightarray 2 tau), ..., (((T/tau)-1) tau rightarray T)
sparse (bool, optional, default = False) – If true compute count matrix, transition matrix and all derived quantities using sparse matrix algebra. In this case python sparse matrices will be returned by the corresponding functions instead of numpy arrays. This behavior is suggested for very large numbers of states (e.g. > 4000) because it is likely to be much more efficient.
connectivity (str, optional, default = 'largest') –
Connectivity mode. Three methods are intended (currently only ‘largest’ is implemented)
- ‘largest’ : The active set is the largest reversibly connected set. All estimation will be done on this subset and all quantities
  
  (transition matrix, stationary distribution, etc) are only defined on this subset and are correspondingly smaller than the full set of states
- ‘all’ : The active set is the full set of states. Estimation will be conducted on each reversibly connected set separately. That means the transition matrix will decompose into disconnected submatrices, the stationary vector is only defined within subsets, etc. Currently not implemented.
- ‘none’ : The active set is the full set of states. Estimation will be conducted on the full set of states without ensuring connectivity. This only permits nonreversible estimation. Currently not implemented.
dt_traj (str, optional, default='1 step') –
Description of the physical time corresponding to the trajectory time step. May be used by analysis algorithms such as plotting tools to pretty-print the axes. By default ‘1 step’, i.e. there is no physical time unit. Specify by a number, whitespace and unit. Permitted units are (* is an arbitrary string):

‘fs’, ‘femtosecond*’

‘ps’, ‘picosecond*’

‘ns’, ‘nanosecond*’

‘us’, ‘microsecond*’

‘ms’, ‘millisecond*’

‘s’, ‘second*’
conf (float, optional, default=0.95) – Confidence interval. By default one-sigma (68.3%) is used. Use 95.4% for two sigma or 99.7% for three sigma.
show_progress (bool, default=True) – Show progressbars for calculation?

References

[1]	Trendelkamp-Schroer, B., H. Wu, F. Paul and F. Noe: Estimation and uncertainty of reversible Markov models. J. Chem. Phys. (in review) Preprint: http://arxiv.org/abs/1507.05990

Methods

__init__([lag, nsamples, nsteps, ...]) Bayesian estimator for MSMs given discrete trajectory statistics

cktest(nsets[, memberships, mlags, conf, ...]) Conducts a Chapman-Kolmogorow test.

coarse_grain(ncoarse[, method]) Returns a coarse-grained Markov model.

committor_backward(A, B) Backward committor from set A to set B

committor_forward(A, B) Forward committor (also known as p_fold or splitting probability) from set A to set B

correlation(a[, b, maxtime, k, ncv]) Time-correlation for equilibrium experiment.

eigenvalues([k]) Compute the transition matrix eigenvalues

eigenvectors_left([k]) Compute the left transition matrix eigenvectors

eigenvectors_right([k]) Compute the right transition matrix eigenvectors

estimate(dtrajs, **kw)

param dtrajs:	discrete trajectories, stored as integer ndarrays (arbitrary size)

expectation(a) Equilibrium expectation value of a given observable.

fingerprint_correlation(a[, b, k, ncv]) Dynamical fingerprint for equilibrium time-correlation experiment.

fingerprint_relaxation(p0, a[, k, ncv]) Dynamical fingerprint for perturbation/relaxation experiment.

fit(X) Estimates parameters - for compatibility with sklearn.

generate_traj(N[, start, stop, stride]) Generates a synthetic discrete trajectory of length N and simulation time stride * lag time * N

get_model_params([deep]) Get parameters for this model.

get_params([deep]) Get parameters for this estimator.

hmm(nhidden) Estimates a hidden Markov state model as described in [1]_

mfpt(A, B) Mean first passage times from set A to set B, in units of the input trajectory time step

pcca(m) Runs PCCA++ [1]_ to compute a metastable decomposition of MSM states

propagate(p0, k) Propagates the initial distribution p0 k times

register_progress_callback(call_back[, stage]) Registers the progress reporter.

relaxation(p0, a[, maxtime, k, ncv]) Simulates a perturbation-relaxation experiment.

sample_by_distributions(distributions, nsample) Generates samples according to given probability distributions

sample_by_state(nsample[, subset, replace]) Generates samples of the connected states.

sample_conf(f, *args, **kwargs) Sample confidence interval of numerical method f over all samples

sample_f(f, *args, **kwargs) Evaluated method f for all samples

sample_mean(f, *args, **kwargs) Sample mean of numerical method f over all samples

sample_std(f, *args, **kwargs) Sample standard deviation of numerical method f over all samples

score(dtrajs[, score_method, score_k]) Scores the MSM using the dtrajs using the variational approach for Markov processes [1]_ [2]_

score_cv(dtrajs[, n, score_method, score_k]) Scores the MSM using the variational approach for Markov processes [1]_ [2]_ and crossvalidation [3]_ .

set_model_params([samples, conf, P, pi, ...])

param samples:	sampled MSMs

set_params(**params) Set the parameters of this estimator.

simulate(N[, start, stop, dt]) Generates a realization of the Markov Model

timescales([k]) The relaxation timescales corresponding to the eigenvalues

trajectory_weights() Uses the MSM to assign a probability weight to each trajectory frame.

update_model_params(**params) Update given model parameter if they are set to specific values

Attributes

`P`	The transition matrix on the active set.
`active_count_fraction`	The fraction of counts in the largest connected set.
`active_set`	The active set of states on which all computations and estimations will be done
`active_state_fraction`	The fraction of states in the largest connected set.
`active_state_indexes`	Ensures that the connected states are indexed and returns the indices
`connected_sets`	The reversible connected sets of states, sorted by size (descending)
`connectivity`	Returns the connectivity mode of the MSM
`count_matrix_active`	The count matrix on the active set given the connectivity mode used.
`count_matrix_full`	The count matrix on full set of discrete states, irrespective as to whether they are connected or not.
`discrete_trajectories_active`	A list of integer arrays with the discrete trajectories mapped to the connectivity mode used.
`discrete_trajectories_full`	A list of integer arrays with the original (unmapped) discrete trajectories
`dt_model`	Description of the physical time corresponding to the lag.
`dtrajs_active`	A list of integer arrays with the discrete trajectories mapped to the connectivity mode used.
`dtrajs_full`	A list of integer arrays with the original (unmapped) discrete trajectories
`effective_count_matrix`	Statistically uncorrelated transition counts within the active set of states
`is_reversible`	Returns whether the MSM is reversible
`is_sparse`	Returns whether the MSM is sparse
`lagtime`	The lag time at which the Markov model was estimated
`largest_connected_set`	The largest reversible connected set of states
`logger`	The logger for this class instance
`metastable_assignments`	Assignment of states to metastable sets using PCCA++
`metastable_distributions`	Probability of metastable states to visit an MSM state by PCCA++
`metastable_memberships`	Probabilities of MSM states to belong to a metastable state by PCCA++
`metastable_sets`	Metastable sets using PCCA++
`model`	The model estimated by this Estimator
`name`	The name of this instance
`neig`	number of eigenvalues to compute.
`nstates`	Number of active states on which all computations and estimations are done
`nstates_full`	Number of states in discrete trajectories
`pi`	The stationary distribution on the MSM states
`reversible`	Returns whether the MSM is reversible
`show_progress`	whether to show the progress of heavy calculations on this object.
`sparse`	Returns whether the MSM is sparse
`stationary_distribution`	The stationary distribution on the MSM states
`timestep_model`	Physical time corresponding to one transition matrix step, e.g.
`transition_matrix`	The transition matrix on the active set.

P¶: The transition matrix on the active set.

active_count_fraction¶: The fraction of counts in the largest connected set.

active_set¶: The active set of states on which all computations and estimations will be done

active_state_fraction¶: The fraction of states in the largest connected set.

active_state_indexes¶: Ensures that the connected states are indexed and returns the indices

cktest(nsets, memberships=None, mlags=10, conf=0.95, err_est=False, n_jobs=1, show_progress=True)¶

Conducts a Chapman-Kolmogorow test.

Parameters:	nsets (int) – number of sets to test on memberships (ndarray(nstates, nsets), optional) – optional state memberships. By default (None) will conduct a cktest on PCCA (metastable) sets. mlags (int or int-array, optional) – multiples of lag times for testing the Model, e.g. range(10). A single int will trigger a range, i.e. mlags=10 maps to mlags=range(10). The setting None will choose mlags automatically according to the longest available trajectory conf (float, optional) – confidence interval err_est (bool, optional) – compute errors also for all estimations (computationally expensive) If False, only the prediction will get error bars, which is often sufficient to validate a model. n_jobs (int, default=1) – how many jobs to use during calculation show_progress (bool, optional) – Show progress bars for calculation?
Returns:	cktest
Return type:	`ChapmanKolmogorovValidator`

References

This test was suggested in [1]_ and described in detail in [2]_.

[1]	F. Noe, Ch. Schuette, E. Vanden-Eijnden, L. Reich and T. Weikl: Constructing the Full Ensemble of Folding Pathways from Short Off-Equilibrium Simulations. Proc. Natl. Acad. Sci. USA, 106, 19011-19016 (2009)

[2]	Prinz, J H, H Wu, M Sarich, B Keller, M Senne, M Held, J D Chodera, C Schuette and F Noe. 2011. Markov models of molecular kinetics: Generation and validation. J Chem Phys 134: 174105

coarse_grain(ncoarse, method='hmm')¶

Returns a coarse-grained Markov model.

Currently only the HMM method described in [1]_ is available for coarse-graining MSMs.

Parameters:	ncoarse (int) – number of coarse states
Returns:	hmsm
Return type:	`MaximumLikelihoodHMSM`

References

[1]	F. Noe, H. Wu, J.-H. Prinz and N. Plattner: Projected and hidden Markov models for calculating kinetics and metastable states of complex molecules J. Chem. Phys. 139, 184114 (2013)

committor_backward(A, B)¶

Backward committor from set A to set B

Parameters:	A (int or int array) – set of starting states B (int or int array) – set of target states

committor_forward(A, B)¶

Forward committor (also known as p_fold or splitting probability) from set A to set B

Parameters:	A (int or int array) – set of starting states B (int or int array) – set of target states

connected_sets¶: The reversible connected sets of states, sorted by size (descending)

connectivity¶: Returns the connectivity mode of the MSM

correlation(a, b=None, maxtime=None, k=None, ncv=None)¶

Time-correlation for equilibrium experiment.

In order to simulate a time-correlation experiment (e.g. fluorescence correlation spectroscopy [NDD11], dynamical neutron scattering [LYP13], ...), first compute the mean values of your experimental observable \(a\) by MSM state:

\[a_i = \frac{1}{N_i} \sum_{x_t \in S_i} f(x_t)\]

where \(S_i\) is the set of configurations belonging to MSM state \(i\) and \(f()\) is a function that computes the experimental observable of interest for configuration \(x_t\). If a cross-correlation function is wanted, also apply the above computation to a second experimental observable \(b\).

Then the accurate (i.e. without statistical error) autocorrelation function of \(f(x_t)\) given the Markov model is computed by correlation(a), and the accurate cross-correlation function is computed by correlation(a,b). This is done by evaluating the equation

\[\begin{split}acf_a(k\tau) &= \mathbf{a}^\top \mathrm{diag}(\boldsymbol{\pi}) \mathbf{P(\tau)}^k \mathbf{a} \\ ccf_{a,b}(k\tau) &= \mathbf{a}^\top \mathrm{diag}(\boldsymbol{\pi}) \mathbf{P(\tau)}^k \mathbf{b}\end{split}\]

where \(acf\) stands for autocorrelation function and \(ccf\) stands for cross-correlation function, \(\mathbf{P(\tau)}\) is the transition matrix at lag time \(\tau\), \(\boldsymbol{\pi}\) is the equilibrium distribution of \(\mathbf{P}\), and \(k\) is the time index.

Note that instead of using this method you could generate a long synthetic trajectory from the MSM and then estimating the time-correlation of your observable(s) directly from this trajectory. However, there is no reason to do this because the present method does that calculation without any sampling, and only in the limit of an infinitely long synthetic trajectory the two results will agree exactly. The correlation function computed by the present method still has statistical uncertainty from the fact that the underlying MSM transition matrix has statistical uncertainty when being estimated from data, but there is no additional (and unnecessary) uncertainty due to synthetic trajectory generation.

Parameters:

a ((n,) ndarray) – Observable, represented as vector on state space
maxtime (int or float) – Maximum time (in units of the input trajectory time step) until which the correlation function will be evaluated. Internally, the correlation function can only be computed in integer multiples of the Markov model lag time, and therefore the actual last time point will be computed at \(\mathrm{ceil}(\mathrm{maxtime} / \tau)\) By default (None), the maxtime will be set equal to the 5 times the slowest relaxation time of the MSM, because after this time the signal is almost constant.
b ((n,) ndarray (optional)) – Second observable, for cross-correlations
k (int (optional)) – Number of eigenvalues and eigenvectors to use for computation. This option is only relevant for sparse matrices and long times for which an eigenvalue decomposition will be done instead of using the matrix power.
ncv (int (optional)) – Only relevant for sparse matrices and large lag times where the relaxation will be computed using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k.

Returns:

times (ndarray (N)) – Time points (in units of the input trajectory time step) at which the correlation has been computed
correlations (ndarray (N)) – Correlation values at given times

Examples

This example computes the autocorrelation function of a simple observable on a three-state Markov model and plots the result using matplotlib:

>>> import numpy as np
>>> import pyemma.msm as msm
>>>
>>> P = np.array([[0.99, 0.01, 0], [0.01, 0.9, 0.09], [0, 0.1, 0.9]])
>>> a = np.array([0.0, 0.5, 1.0])
>>> M = msm.markov_model(P)
>>> times, acf = M.correlation(a)
>>>
>>> import matplotlib.pylab as plt
>>> plt.plot(times, acf)  

References

[NDD11]

Noe, F., S. Doose, I. Daidone, M. Loellmann, J. D. Chodera, M. Sauer and J. C. Smith. 2011 Dynamical fingerprints for probing individual relaxation processes in biomolecular dynamics with simulations and kinetic experiments. Proc. Natl. Acad. Sci. USA 108, 4822-4827.

[LYP13]

Lindner, B., Z. Yi, J.-H. Prinz, J. C. Smith and F. Noe. 2013. Dynamic Neutron Scattering from Conformational Dynamics I: Theory and Markov models. J. Chem. Phys. 139, 175101.

count_matrix_active¶

The count matrix on the active set given the connectivity mode used.

For example, for connectivity=’largest’, the count matrix is given only on the largest reversibly connected set. Attention: This count matrix has been obtained by sliding a window of length tau across the data. It contains a factor of tau more counts than are statistically uncorrelated. It’s fine to use this matrix for maximum likelihood estimated, but it will give far too small errors if you use it for uncertainty calculations. In order to do uncertainty calculations, use the effective count matrix, see: effective_count_matrix

See also

effective_count_matrix: For a count matrix with effective (statistically uncorrelated) counts.

count_matrix_full¶

The count matrix on full set of discrete states, irrespective as to whether they are connected or not. Attention: This count matrix has been obtained by sliding a window of length tau across the data. It contains a factor of tau more counts than are statistically uncorrelated. It’s fine to use this matrix for maximum likelihood estimated, but it will give far too small errors if you use it for uncertainty calculations. In order to do uncertainty calculations, use the effective count matrix, see: effective_count_matrix (only implemented on the active set), or divide this count matrix by tau.

See also

effective_count_matrix: For a active-set count matrix with effective (statistically uncorrelated) counts.

discrete_trajectories_active¶: A list of integer arrays with the discrete trajectories mapped to the connectivity mode used. For example, for connectivity=’largest’, the indexes will be given within the connected set. Frames that are not in the connected set will be -1.

discrete_trajectories_full¶: A list of integer arrays with the original (unmapped) discrete trajectories

dt_model¶: Description of the physical time corresponding to the lag.

dtrajs_active¶: A list of integer arrays with the discrete trajectories mapped to the connectivity mode used. For example, for connectivity=’largest’, the indexes will be given within the connected set. Frames that are not in the connected set will be -1.

dtrajs_full¶: A list of integer arrays with the original (unmapped) discrete trajectories

effective_count_matrix¶

Statistically uncorrelated transition counts within the active set of states

You can use this count matrix for Bayesian estimation or error perturbation.

References

[1] Noe, F. (2015) Statistical inefficiency of Markov model count matrices: http://publications.mi.fu-berlin.de/1699/1/autocorrelation_counts.pdf

eigenvalues(k=None)¶

Compute the transition matrix eigenvalues

Parameters:	k (int) – number of eigenvalues to be returned. By default will return all available eigenvalues
Returns:	ts – transition matrix eigenvalues \(\lambda_i, i = 1, ..., k\)., sorted by descending norm.
Return type:	ndarray(k,)

eigenvectors_left(k=None)¶

Compute the left transition matrix eigenvectors

Parameters:	k (int) – number of eigenvectors to be returned. By default all available eigenvectors.
Returns:	L – left eigenvectors in a row matrix. l_ij is the j’th component of the i’th left eigenvector
Return type:	ndarray(k,n)

eigenvectors_right(k=None)¶

Compute the right transition matrix eigenvectors

Parameters:	k (int) – number of eigenvectors to be computed. By default all available eigenvectors.
Returns:	R – right eigenvectors in a column matrix. r_ij is the i’th component of the j’th right eigenvector
Return type:	ndarray(n,k)

estimate(dtrajs, **kw)¶

Parameters:	dtrajs (list containing ndarrays(dtype=int) or ndarray(n, dtype=int)) – discrete trajectories, stored as integer ndarrays (arbitrary size) or a single ndarray for only one trajectory. kw (dict) – Other Parameters. See documentation of class.
Returns:	msm – Estimated Hidden Markov state model
Return type:	`BayesianMSM`

expectation(a)¶

Equilibrium expectation value of a given observable.

Parameters:	a ((n,) ndarray) – Observable vector on the MSM state space
Returns:	val – Equilibrium expectation value fo the given observable
Return type:	float

Notes

The equilibrium expectation value of an observable \(a\) is defined as follows

\[\mathbb{E}_{\mu}[a] = \sum_i \pi_i a_i\]

\(\pi=(\pi_i)\) is the stationary vector of the transition matrix \(P\).

fingerprint_correlation(a, b=None, k=None, ncv=None)¶

Dynamical fingerprint for equilibrium time-correlation experiment.

Parameters:

a ((n,) ndarray) – Observable, represented as vector on MSM state space
b ((n,) ndarray, optional) – Second observable, for cross-correlations
k (int, optional) – Number of eigenvalues and eigenvectors to use for computation. This option is only relevant for sparse matrices and long times for which an eigenvalue decomposition will be done instead of using the matrix power
ncv (int, optional) – Only relevant for sparse matrices and large lag times, where the relaxation will be computed using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k

Returns:

timescales ((k,) ndarray) – Time-scales (in units of the input trajectory time step) of the transition matrix
amplitudes ((k,) ndarray) – Amplitudes for the correlation experiment

References

Spectral densities are commonly used in spectroscopy. Dynamical fingerprints are a useful representation for computational spectroscopy results and have been introduced in [NDD11].

[NDD11]

Noe, F, S Doose, I Daidone, M Loellmann, M Sauer, J D Chodera and J Smith. 2010. Dynamical fingerprints for probing individual relaxation processes in biomolecular dynamics with simulations and kinetic experiments. PNAS 108 (12): 4822-4827.

fingerprint_relaxation(p0, a, k=None, ncv=None)¶

Dynamical fingerprint for perturbation/relaxation experiment.

Parameters:

p0 ((n,) ndarray) – Initial distribution for a relaxation experiment
a ((n,) ndarray) – Observable, represented as vector on state space
k (int, optional) – Number of eigenvalues and eigenvectors to use for computation
ncv (int, optional) – Only relevant for sparse matrices and large lag times, where the relaxation will be computes using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k

Returns:

timescales ((k,) ndarray) – Time-scales (in units of the input trajectory time step) of the transition matrix
amplitudes ((k,) ndarray) – Amplitudes for the relaxation experiment

References

Spectral densities are commonly used in spectroscopy. Dynamical fingerprints are a useful representation for computational spectroscopy results and have been introduced in [NDD11].

[NDD11]

Noe, F, S Doose, I Daidone, M Loellmann, M Sauer, J D Chodera and J Smith. 2010. Dynamical fingerprints for probing individual relaxation processes in biomolecular dynamics with simulations and kinetic experiments. PNAS 108 (12): 4822-4827.

fit(X)¶

Estimates parameters - for compatibility with sklearn.

Parameters:	X (object) – A reference to the data from which the model will be estimated
Returns:	estimator – The estimator (self) with estimated model.
Return type:	object

generate_traj(N, start=None, stop=None, stride=1)¶

Generates a synthetic discrete trajectory of length N and simulation time stride * lag time * N

This information can be used in order to generate a synthetic molecular dynamics trajectory - see pyemma.coordinates.save_traj()

Note that the time different between two samples is the Markov model lag time tau. When comparing quantities computing from this synthetic trajectory and from the input trajectories, the time points of this trajectory must be scaled by the lag time in order to have them on the same time scale.

Parameters:	N (int) – Number of time steps in the output trajectory. The total simulation time is stride * lag time * N start (int, optional, default = None) – starting state. If not given, will sample from the stationary distribution of P stop (int or int-array-like, optional, default = None) – stopping set. If given, the trajectory will be stopped before N steps once a state of the stop set is reached stride (int, optional, default = 1) – Multiple of lag time used as a time step. By default, the time step is equal to the lag time
Returns:	indexes – trajectory and time indexes of the simulated trajectory. Each row consist of a tuple (i, t), where i is the index of the trajectory and t is the time index within the trajectory. Note that the time different between two samples is the Markov model lag time tau
Return type:	ndarray( (N, 2) )

See also

pyemma.coordinates.save_traj(): in order to save this synthetic trajectory as a trajectory file with molecular structures

get_model_params(deep=True)¶

Get parameters for this model.

Parameters:	deep (boolean, optional) – If True, will return the parameters for this estimator and contained subobjects that are estimators.
Returns:	params – Parameter names mapped to their values.
Return type:	mapping of string to any

get_params(deep=True)¶

Get parameters for this estimator.

Parameters:	deep (boolean, optional) – If True, will return the parameters for this estimator and contained subobjects that are estimators.
Returns:	params – Parameter names mapped to their values.
Return type:	mapping of string to any

hmm(nhidden)¶

Estimates a hidden Markov state model as described in [1]_

Parameters:	nhidden (int) – number of hidden (metastable) states
Returns:	hmsm
Return type:	`MaximumLikelihoodHMSM`

References

[1]	F. Noe, H. Wu, J.-H. Prinz and N. Plattner: Projected and hidden Markov models for calculating kinetics and metastable states of complex molecules J. Chem. Phys. 139, 184114 (2013)

is_reversible¶: Returns whether the MSM is reversible

is_sparse¶: Returns whether the MSM is sparse

lagtime¶: The lag time at which the Markov model was estimated

largest_connected_set¶: The largest reversible connected set of states

logger¶: The logger for this class instance

metastable_assignments¶

Assignment of states to metastable sets using PCCA++

Computes the assignment to metastable sets for active set states using the PCCA++ method [1]_. pcca() needs to be called first to make this attribute available.

This is only recommended for visualization purposes. You cannot compute any actual quantity of the coarse-grained kinetics without employing the fuzzy memberships!

Returns:	assignments – For each MSM state, the metastable state it is located in.
Return type:	ndarray (n,)

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

metastable_distributions¶

Probability of metastable states to visit an MSM state by PCCA++

Computes the probability distributions of active set states within each metastable set by combining the the PCCA++ method [1]_ with Bayesian inversion as described in [2]_.

pcca() needs to be called first to make this attribute available.

Returns:	p_out – A matrix containing the probability distribution of each active set state, given that we are in one of the m metastable sets, i.e. p(state \| metastable). The row sums of p_out are 1.
Return type:	ndarray (m,n)

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7, 147-179.

[2]	F. Noe, H. Wu, J.-H. Prinz and N. Plattner. 2013. Projected and hidden Markov models for calculating kinetics and metastable states of complex molecules J. Chem. Phys. 139, 184114.

metastable_memberships¶

Probabilities of MSM states to belong to a metastable state by PCCA++

Computes the memberships of active set states to metastable sets with the PCCA++ method [1]_.

pcca() needs to be called first to make this attribute available.

Returns:	M – A matrix containing the probability or membership of each state to be assigned to each metastable set, i.e. p(metastable \| state). The row sums of M are 1.
Return type:	ndarray((n,m))

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

metastable_sets¶

Metastable sets using PCCA++

Computes the metastable sets of active set states within each metastable set using the PCCA++ method [1]_. pcca() needs to be called first to make this attribute available.

This is only recommended for visualization purposes. You cannot compute any actual quantity of the coarse-grained kinetics without employing the fuzzy memberships!

Returns:	sets – A list of length equal to metastable states. Each element is an array with microstate indexes contained in it
Return type:	list of ndarray

See also

pcca: to compute the metastable decomposition

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

mfpt(A, B)¶

Mean first passage times from set A to set B, in units of the input trajectory time step

Parameters:	A (int or int array) – set of starting states B (int or int array) – set of target states

model¶: The model estimated by this Estimator

name¶: The name of this instance

neig¶: number of eigenvalues to compute.

nstates¶: Number of active states on which all computations and estimations are done

nstates_full¶: Number of states in discrete trajectories

pcca(m)¶

Runs PCCA++ [1]_ to compute a metastable decomposition of MSM states

After calling this method you can access metastable_memberships(), metastable_distributions(), metastable_sets() and metastable_assignments().

Parameters:	m (int) – Number of metastable sets
Returns:	pcca_obj – An object containing all PCCA quantities. However, you can also ignore this return value and instead retrieve the quantities of your interest with the following MSM functions: `metastable_memberships()`, `metastable_distributions()`, `metastable_sets()` and `metastable_assignments()`.
Return type:	`PCCA`

Notes

If you coarse grain with PCCA++, the order of the obtained memberships might not be preserved. This also applies for metastable_memberships(), metastable_distributions(), metastable_sets(), metastable_assignments()

References

[1]	Roeblitz, S and M Weber. 2013. Fuzzy spectral clustering by PCCA+: application to Markov state models and data classification. Advances in Data Analysis and Classification 7 (2): 147-179

pi¶: The stationary distribution on the MSM states

propagate(p0, k)¶

Propagates the initial distribution p0 k times

Computes the product

\[p_k = p_0^T P^k\]

If the lag time of transition matrix \(P\) is \(\tau\), this will provide the probability distribution at time \(k \tau\).

Parameters:	p0 (ndarray(n,)) – Initial distribution. Vector of size of the active set. k (int) – Number of time steps
Returns:	pk – Distribution after k steps. Vector of size of the active set.
Return type:	ndarray(n,)

register_progress_callback(call_back, stage=0)¶

Registers the progress reporter.

Parameters:	call_back (function) – This function will be called with the following arguments: stage (int) instance of pyemma.utils.progressbar.ProgressBar optional args and named keywords (kw), for future changes stage* (int, optional, default=0) – The stage you want the given call back function to be fired.

relaxation(p0, a, maxtime=None, k=None, ncv=None)¶

Simulates a perturbation-relaxation experiment.

In perturbation-relaxation experiments such as temperature-jump, pH-jump, pressure jump or rapid mixing experiments, an ensemble of molecules is initially prepared in an off-equilibrium distribution and the expectation value of some experimental observable is then followed over time as the ensemble relaxes towards equilibrium.

In order to simulate such an experiment, first determine the distribution of states at which the experiment is started, \(p_0\) and compute the mean values of your experimental observable \(a\) by MSM state:

\[a_i = \frac{1}{N_i} \sum_{x_t \in S_i} f(x_t)\]

where \(S_i\) is the set of configurations belonging to MSM state \(i\) and \(f()\) is a function that computes the experimental observable of interest for configuration \(x_t\).

Then the accurate (i.e. without statistical error) time-dependent expectation value of \(f(x_t)\) given the Markov model is computed by relaxation(p0, a). This is done by evaluating the equation

\[E_a(k\tau) = \mathbf{p_0}^{\top} \mathbf{P(\tau)}^k \mathbf{a}\]

where \(E\) stands for the expectation value that relaxes to its equilibrium value that is identical to expectation(a), \(\mathbf{P(\tau)}\) is the transition matrix at lag time \(\tau\), \(\boldsymbol{\pi}\) is the equilibrium distribution of \(\mathbf{P}\), and \(k\) is the time index.

Note that instead of using this method you could generate many synthetic trajectory from the MSM with starting points drawn from the initial distribution and then estimating the time-dependent expectation value by an ensemble average. However, there is no reason to do this because the present method does that calculation without any sampling, and only in the limit of an infinitely many trajectories the two results will agree exactly. The relaxation function computed by the present method still has statistical uncertainty from the fact that the underlying MSM transition matrix has statistical uncertainty when being estimated from data, but there is no additional (and unnecessary) uncertainty due to synthetic trajectory generation.

Parameters:

p0 ((n,) ndarray) – Initial distribution for a relaxation experiment
a ((n,) ndarray) – Observable, represented as vector on state space
maxtime (int or float, optional) – Maximum time (in units of the input trajectory time step) until which the correlation function will be evaluated. Internally, the correlation function can only be computed in integer multiples of the Markov model lag time, and therefore the actual last time point will be computed at \(\mathrm{ceil}(\mathrm{maxtime} / \tau)\). By default (None), the maxtime will be set equal to the 5 times the slowest relaxation time of the MSM, because after this time the signal is constant.
k (int (optional)) – Number of eigenvalues and eigenvectors to use for computation
ncv (int (optional)) – Only relevant for sparse matrices and large lag times, where the relaxation will be computes using an eigenvalue decomposition. The number of Lanczos vectors generated, ncv must be greater than k; it is recommended that ncv > 2*k

Returns:

times (ndarray (N)) – Time points (in units of the input trajectory time step) at which the relaxation has been computed
res (ndarray) – Array of expectation value at given times

reversible¶: Returns whether the MSM is reversible

sample_by_distributions(distributions, nsample)¶

Generates samples according to given probability distributions

Parameters:	distributions (list or array of ndarray ( (n) )) – m distributions over states. Each distribution must be of length n and must sum up to 1.0 nsample (int) – Number of samples per distribution. If replace = False, the number of returned samples per state could be smaller if less than nsample indexes are available for a state.
Returns:	indexes – List of the sampled indices by distribution. Each element is an index array with a number of rows equal to nsample, with rows consisting of a tuple (i, t), where i is the index of the trajectory and t is the time index within the trajectory.
Return type:	length m list of ndarray( (nsample, 2) )

sample_by_state(nsample, subset=None, replace=True)¶

Generates samples of the connected states.

For each state in the active set of states, generates nsample samples with trajectory/time indexes. This information can be used in order to generate a trajectory of length nsample * nconnected using pyemma.coordinates.save_traj() or nconnected trajectories of length nsample each using pyemma.coordinates.save_traj()

Parameters:	nsample (int) – Number of samples per state. If replace = False, the number of returned samples per state could be smaller if less than nsample indexes are available for a state. subset (ndarray((n)), optional, default = None) – array of states to be indexed. By default all states in the connected set will be used replace (boolean, optional) – Whether the sample is with or without replacement
Returns:	indexes – list of trajectory/time index arrays with an array for each state. Within each index array, each row consist of a tuple (i, t), where i is the index of the trajectory and t is the time index within the trajectory.
Return type:	list of ndarray( (N, 2) )

See also

pyemma.coordinates.save_traj(): in order to save the sampled frames sequentially in a trajectory file with molecular structures
pyemma.coordinates.save_trajs(): in order to save the sampled frames in nconnected trajectory files with molecular structures

sample_conf(f, *args, **kwargs)¶

Sample confidence interval of numerical method f over all samples

Calls f(*args, **kwargs) on all samples and computes the confidence interval. Size of confidence interval is given in the construction of the SampledModel. f must return a numerical value or an ndarray.

Parameters:

f (method reference or name (str)) – Model method to be evaluated for each model sample
args (arguments) – Non-keyword arguments to be passed to the method in each call
kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call

Returns:

L (float or ndarray) – lower value or array of confidence interval
R (float or ndarray) – upper value or array of confidence interval

sample_f(f, *args, **kwargs)¶

Evaluated method f for all samples

Calls f(*args, **kwargs) on all samples.

Parameters:	f (method reference or name (str)) – Model method to be evaluated for each model sample args (arguments) – Non-keyword arguments to be passed to the method in each call kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call
Returns:	vals – list of results of the method calls
Return type:	list

sample_mean(f, *args, **kwargs)¶

Sample mean of numerical method f over all samples

Calls f(*args, **kwargs) on all samples and computes the mean. f must return a numerical value or an ndarray.

Parameters:	f (method reference or name (str)) – Model method to be evaluated for each model sample args (arguments) – Non-keyword arguments to be passed to the method in each call kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call
Returns:	mean – mean value or mean array
Return type:	float or ndarray

sample_std(f, *args, **kwargs)¶

Sample standard deviation of numerical method f over all samples

Calls f(*args, **kwargs) on all samples and computes the standard deviation. f must return a numerical value or an ndarray.

Parameters:	f (method reference or name (str)) – Model method to be evaluated for each model sample args (arguments) – Non-keyword arguments to be passed to the method in each call kwargs (keyword-argments) – Keyword arguments to be passed to the method in each call
Returns:	std – standard deviation or array of standard deviations
Return type:	float or ndarray

score(dtrajs, score_method=None, score_k=None)¶

Scores the MSM using the dtrajs using the variational approach for Markov processes [1]_ [2]_

Currently only implemented using dense matrices - will be slow for large state spaces.

Parameters:

dtrajs (list of arrays) – test data (discrete trajectories).
score_method (str, optional, default='VAMP2') – Overwrite scoring method if desired. If None, the estimators scoring method will be used. See __init__ for documention.
score_k (int or None) – Overwrite scoring rank if desired. If None, the estimators scoring rank will be used. See __init__ for documention.
score_method –
Overwrite scoring method to be used if desired. If None, the estimators scoring method will be used. Available scores are based on the variational approach for Markov processes [1]_ [2]_ :
- ‘VAMP1’ Sum of singular values of the symmetrized transition matrix [2]_ .
  
  If the MSM is reversible, this is equal to the sum of transition matrix eigenvalues, also called Rayleigh quotient [1]_ [3]_ .
- ‘VAMP2’ Sum of squared singular values of the symmetrized transition matrix [2]_ .
  
  If the MSM is reversible, this is equal to the kinetic variance [4]_ .
score_k – The maximum number of eigenvalues or singular values used in the score. If set to None, all available eigenvalues will be used.

References

[1]	Noe, F. and F. Nueske: A variational approach to modeling slow processes in stochastic dynamical systems. SIAM Multiscale Model. Simul. 11, 635-655 (2013).

[2]	Wu, H and F. Noe: Variational approach for learning Markov processes from time series data (in preparation)

[3]	McGibbon, R and V. S. Pande: Variational cross-validation of slow dynamical modes in molecular kinetics, J. Chem. Phys. 142, 124105 (2015)

[4]	Noe, F. and C. Clementi: Kinetic distance and kinetic maps from molecular dynamics simulation. J. Chem. Theory Comput. 11, 5002-5011 (2015)

score_cv(dtrajs, n=10, score_method=None, score_k=None)¶

Scores the MSM using the variational approach for Markov processes [1]_ [2]_ and crossvalidation [3]_ .

Divides the data into training and test data, fits a MSM using the training data using the parameters of this estimator, and scores is using the test data. Currently only one way of splitting is implemented, where for each n, the data is randomly divided into two approximately equally large sets of discrete trajectory fragments with lengths of at least the lagtime.

Currently only implemented using dense matrices - will be slow for large state spaces.

Parameters:

dtrajs (list of arrays) – Test data (discrete trajectories).
n (number of samples) – Number of repetitions of the cross-validation. Use large n to get solid means of the score.
score_method (str, optional, default='VAMP2') –
Overwrite scoring method to be used if desired. If None, the estimators scoring method will be used. Available scores are based on the variational approach for Markov processes [1]_ [2]_ :
- ‘VAMP1’ Sum of singular values of the symmetrized transition matrix [2]_ .
  
  If the MSM is reversible, this is equal to the sum of transition matrix eigenvalues, also called Rayleigh quotient [1]_ [3]_ .
- ‘VAMP2’ Sum of squared singular values of the symmetrized transition matrix [2]_ .
  
  If the MSM is reversible, this is equal to the kinetic variance [4]_ .
score_k (int or None) – The maximum number of eigenvalues or singular values used in the score. If set to None, all available eigenvalues will be used.

References

[1]	Noe, F. and F. Nueske: A variational approach to modeling slow processes in stochastic dynamical systems. SIAM Multiscale Model. Simul. 11, 635-655 (2013).

[2]	Wu, H and F. Noe: Variational approach for learning Markov processes from time series data (in preparation).

[3]	McGibbon, R and V. S. Pande: Variational cross-validation of slow dynamical modes in molecular kinetics, J. Chem. Phys. 142, 124105 (2015).

[4]	Noe, F. and C. Clementi: Kinetic distance and kinetic maps from molecular dynamics simulation. J. Chem. Theory Comput. 11, 5002-5011 (2015).

set_model_params(samples=None, conf=0.95, P=None, pi=None, reversible=None, dt_model='1 step', neig=None)¶

Parameters:	samples (list of MSM objects) – sampled MSMs conf (float, optional, default=0.68) – Confidence interval. By default one-sigma (68.3%) is used. Use 95.4% for two sigma or 99.7% for three sigma.

set_params(**params)¶: Set the parameters of this estimator. The method works on simple estimators as well as on nested objects (such as pipelines). The former have parameters of the form <component>__<parameter> so that it’s possible to update each component of a nested object. :returns: :rtype: self

show_progress¶: whether to show the progress of heavy calculations on this object.

simulate(N, start=None, stop=None, dt=1)¶

Generates a realization of the Markov Model

Parameters:	N (int) – trajectory length in steps of the lag time start (int, optional, default = None) – starting hidden state. If not given, will sample from the stationary distribution of the hidden transition matrix. stop (int or int-array-like, optional, default = None) – stopping hidden set. If given, the trajectory will be stopped before N steps once a hidden state of the stop set is reached dt (int) – trajectory will be saved every dt time steps. Internally, the dt’th power of P is taken to ensure a more efficient simulation.
Returns:	htraj – The state trajectory with length N/dt
Return type:	(N/dt, ) ndarray

sparse¶: Returns whether the MSM is sparse

stationary_distribution¶: The stationary distribution on the MSM states

timescales(k=None)¶

The relaxation timescales corresponding to the eigenvalues

Parameters:	k (int) – number of timescales to be returned. By default all available eigenvalues, minus 1.
Returns:	ts – relaxation timescales in units of the input trajectory time step, defined by \(-\tau / ln \| \lambda_i \|, i = 2,...,k+1\).
Return type:	ndarray(m)

timestep_model¶: Physical time corresponding to one transition matrix step, e.g. ‘10 ps’

trajectory_weights()¶

Uses the MSM to assign a probability weight to each trajectory frame.

This is a powerful function for the calculation of arbitrary observables in the trajectories one has started the analysis with. The stationary probability of the MSM will be used to reweigh all states. Returns a list of weight arrays, one for each trajectory, and with a number of elements equal to trajectory frames. Given \(N\) trajectories of lengths \(T_1\) to \(T_N\), this function returns corresponding weights:

\[(w_{1,1}, ..., w_{1,T_1}), (w_{N,1}, ..., w_{N,T_N})\]

that are normalized to one:

\[\sum_{i=1}^N \sum_{t=1}^{T_i} w_{i,t} = 1\]

Suppose you are interested in computing the expectation value of a function \(a(x)\), where \(x\) are your input configurations. Use this function to compute the weights of all input configurations and obtain the estimated expectation by:

\[\langle a \rangle = \sum_{i=1}^N \sum_{t=1}^{T_i} w_{i,t} a(x_{i,t})\]

Or if you are interested in computing the time-lagged correlation between functions \(a(x)\) and \(b(x)\) you could do:

\[\langle a(t) b(t+\tau) \rangle_t = \sum_{i=1}^N \sum_{t=1}^{T_i} w_{i,t} a(x_{i,t}) a(x_{i,t+\tau})\]

Returns:	weights – The normalized trajectory weights. Given \(N\) trajectories of lengths \(T_1\) to \(T_N\), returns the corresponding weights: \[(w_{1,1}, ..., w_{1,T_1}), (w_{N,1}, ..., w_{N,T_N})\]
Return type:	list of ndarray

transition_matrix¶: The transition matrix on the active set.

update_model_params(**params)¶: Update given model parameter if they are set to specific values