pyemma.coordinates.transform.PCA¶

class pyemma.coordinates.transform.PCA(dim=-1, var_cutoff=0.95, mean=None, stride=1, skip=0)¶

Principal component analysis.

__init__(dim=-1, var_cutoff=0.95, mean=None, stride=1, skip=0)¶

Principal component analysis.

Given a sequence of multivariate data \(X_t\), computes the mean-free covariance matrix.

\[C = (X - \mu)^T (X - \mu)\]

and solves the eigenvalue problem

\[C r_i = \sigma_i r_i,\]

where \(r_i\) are the principal components and \(\sigma_i\) are their respective variances.

When used as a dimension reduction method, the input data is projected onto the dominant principal components.

Parameters:

dim (int, optional, default -1) – the number of dimensions (independent components) to project onto. A call to the map function reduces the d-dimensional input to only dim dimensions such that the data preserves the maximum possible autocorrelation amongst dim-dimensional linear projections. -1 means all numerically available dimensions will be used unless reduced by var_cutoff. Setting dim to a positive value is exclusive with var_cutoff.
var_cutoff (float in the range [0,1], optional, default 0.95) – Determines the number of output dimensions by including dimensions until their cumulative kinetic variance exceeds the fraction subspace_variance. var_cutoff=1.0 means all numerically available dimensions (see epsilon) will be used, unless set by dim. Setting var_cutoff smaller than 1.0 is exclusive with dim
mean (ndarray, optional, default None) – Optionally pass pre-calculated means to avoid their re-computation. The shape has to match the input dimension.

Methods

`__init__`([dim, var_cutoff, mean, stride, skip])	Principal component analysis.
`describe`()	Get a descriptive string representation of this class.
`dimension`()	output dimension
`estimate`(X, **kwargs)	Estimates the model given the data X
`fit`(X)	Estimates parameters - for compatibility with sklearn.
`fit_transform`(X[, y])	Fit to data, then transform it.
`get_output`([dimensions, stride, skip, chunk])	Maps all input data of this transformer and returns it as an array or list of arrays
`get_params`([deep])	Get parameters for this estimator.
`iterator`([stride, lag, chunk, ...])	creates an iterator to stream over the (transformed) data.
`n_chunks`(chunksize[, stride, skip])	how many chunks an iterator of this sourcde will output, starting (eg. after calling reset())
`n_frames_total`([stride, skip])	Returns total number of frames.
`number_of_trajectories`()	Returns the number of trajectories.
`output_type`()	By default transformers return single precision floats.
`partial_fit`(X)
`register_progress_callback`(call_back[, stage])	Registers the progress reporter.
`set_params`(**params)	Set the parameters of this estimator.
`trajectory_length`(itraj[, stride, skip])	Returns the length of trajectory of the requested index.
`trajectory_lengths`([stride, skip])	Returns the length of each trajectory.
`transform`(X)	Maps the input data through the transformer to correspondingly shaped output data array/list.
`write_to_csv`([filename, extension, ...])	write all data to csv with numpy.savetxt

Attributes

`chunksize`	chunksize defines how much data is being processed at once.
`cumvar`
`data_producer`	The data producer for this data source object (can be another data source object).
`default_chunksize`	How much data will be processed at once, in case no chunksize has been provided.
`eigenvalues`
`eigenvectors`
`feature_PC_correlation`	Instantaneous correlation matrix between input features and PCs
`filenames`	Property which returns a list of filenames the data is originally from.
`in_memory`	are results stored in memory?
`is_random_accessible`	Check if self._is_random_accessible is set to true and if all the random access strategies are implemented.
`is_reader`	Property telling if this data source is a reader or not.
`logger`	The logger for this class instance
`mean`
`model`	The model estimated by this Estimator
`name`	The name of this instance
`ndim`
`ntraj`
`ra_itraj_cuboid`	Implementation of random access with slicing that can be up to 3-dimensional, where the first dimension corresponds to the trajectory index, the second dimension corresponds to the frames and the third dimension corresponds to the dimensions of the frames.
`ra_itraj_jagged`	Behaves like ra_itraj_cuboid just that the trajectories are not truncated and returned as a list.
`ra_itraj_linear`	Implementation of random access that takes arguments as the default random access (i.e., up to three dimensions with trajs, frames and dims, respectively), but which considers the frame indexing to be contiguous.
`ra_linear`	Implementation of random access that takes a (maximal) two-dimensional slice where the first component corresponds to the frames and the second component corresponds to the dimensions.
`show_progress`	whether to show the progress of heavy calculations on this object.

chunksize¶: chunksize defines how much data is being processed at once.

data_producer¶: The data producer for this data source object (can be another data source object). :returns: :rtype: This data source’s data producer.

default_chunksize¶: How much data will be processed at once, in case no chunksize has been provided.

describe()¶: Get a descriptive string representation of this class.

dimension()¶: output dimension

estimate(X, **kwargs)¶

Estimates the model given the data X

Parameters:	X (object) – A reference to the data from which the model will be estimated params (dict) – New estimation parameter values. The parameters must that have been announced in the __init__ method of this estimator. The present settings will overwrite the settings of parameters given in the __init__ method, i.e. the parameter values after this call will be those that have been used for this estimation. Use this option if only one or a few parameters change with respect to the __init__ settings for this run, and if you don’t need to remember the original settings of these changed parameters.
Returns:	estimator – The estimated estimator with the model being available.
Return type:	object

feature_PC_correlation¶

Instantaneous correlation matrix between input features and PCs

Denoting the input features as \(X_i\) and the PCs as \(\theta_j\), the instantaneous, linear correlation between them can be written as

\[\mathbf{Corr}(X_i, \mathbf{\theta}_j) = \frac{1}{\sigma_{X_i}}\sum_l \sigma_{X_iX_l} \mathbf{U}_{li}\]

The matrix \(\mathbf{U}\) is the matrix containing, as column vectors, the eigenvectors of the input-feature covariance-maxtrix.

Returns:	feature_PC_correlation – correlation matrix between input features and PCs. There is a row for each feature and a column for each PC.
Return type:	ndarray(n,m)

filenames¶: Property which returns a list of filenames the data is originally from. :returns: list of str :rtype: list of filenames if data is originating from a file based reader

fit(X)¶

Estimates parameters - for compatibility with sklearn.

Parameters:	X (object) – A reference to the data from which the model will be estimated
Returns:	estimator – The estimator (self) with estimated model.
Return type:	object

fit_transform(X, y=None, **fit_params)¶

Fit to data, then transform it. Fits transformer to X and y with optional parameters fit_params and returns a transformed version of X. :param X: Training set. :type X: numpy array of shape [n_samples, n_features] :param y: Target values. :type y: numpy array of shape [n_samples]

Returns:	X_new – Transformed array.
Return type:	numpy array of shape [n_samples, n_features_new]

get_output(dimensions=slice(0, None, None), stride=1, skip=0, chunk=None)¶

Maps all input data of this transformer and returns it as an array or list of arrays

Parameters:	dimensions (list-like of indexes or slice, default=all) – indices of dimensions you like to keep. stride (int, default=1) – only take every n’th frame. skip (int, default=0) – initially skip n frames of each file. chunk (int, default=None) – How many frames to process at once. If not given obtain the chunk size from the source.
Returns:	output – the mapped data, where T is the number of time steps of the input data, or if stride > 1, floor(T_in / stride). d is the output dimension of this transformer. If the input consists of a list of trajectories, Y will also be a corresponding list of trajectories
Return type:	list of ndarray(T_i, d)

get_params(deep=True)¶

Get parameters for this estimator.

Parameters:	deep (boolean, optional) – If True, will return the parameters for this estimator and contained subobjects that are estimators.
Returns:	params – Parameter names mapped to their values.
Return type:	mapping of string to any

in_memory¶: are results stored in memory?

is_random_accessible¶: Check if self._is_random_accessible is set to true and if all the random access strategies are implemented. :returns: bool :rtype: Returns True if random accessible via strategies and False otherwise.

is_reader¶: Property telling if this data source is a reader or not. :returns: bool :rtype: True if this data source is a reader and False otherwise

iterator(stride=1, lag=0, chunk=None, return_trajindex=True, cols=None, skip=0)¶

creates an iterator to stream over the (transformed) data.

If your data is too large to fit into memory and you want to incrementally compute some quantities on it, you can create an iterator on a reader or transformer (eg. TICA) to avoid memory overflows.

Parameters:	stride (int, default=1) – Take only every stride’th frame. lag (int, default=0) – how many frame to omit for each file. chunk (int, default=None) – How many frames to process at once. If not given obtain the chunk size from the source. return_trajindex (boolean, default=True) – a chunk of data if return_trajindex is False, otherwise a tuple of (trajindex, data). cols (array like, default=None) – return only the given columns. skip (int, default=0) – skip ‘n’ first frames of each trajectory.
Returns:	iter – a implementation of a DataSourceIterator to stream over the data
Return type:	instance of DataSourceIterator

Examples

>>> from pyemma.coordinates import source; import numpy as np
>>> data = [np.arange(3), np.arange(4, 7)]
>>> reader = source(data)
>>> iterator = reader.iterator(chunk=1)
>>> for array_index, chunk in iterator:
...     print(array_index, chunk)
0 [[0]]
0 [[1]]
0 [[2]]
1 [[4]]
1 [[5]]
1 [[6]]

logger¶: The logger for this class instance

model¶: The model estimated by this Estimator

n_chunks(chunksize, stride=1, skip=0)¶

how many chunks an iterator of this sourcde will output, starting (eg. after calling reset())

Parameters:	chunksize – stride – skip –

n_frames_total(stride=1, skip=0)¶

Returns total number of frames.

Parameters:	stride (int) – return value is the number of frames in trajectories when running through them with a step size of stride. skip (int, default=0) – skip the first initial n frames per trajectory.
Returns:	n_frames_total – total number of frames.
Return type:	int

name¶: The name of this instance

number_of_trajectories()¶

Returns the number of trajectories.

Parameters:	stride (None (default) or np.ndarray) –
Returns:	int
Return type:	number of trajectories

output_type()¶: By default transformers return single precision floats.

ra_itraj_cuboid¶

Implementation of random access with slicing that can be up to 3-dimensional, where the first dimension corresponds to the trajectory index, the second dimension corresponds to the frames and the third dimension corresponds to the dimensions of the frames.

The with the frame slice selected frames will be loaded from each in the trajectory-slice selected trajectories and then sliced with the dimension slice. For example: The data consists out of three trajectories with length 10, 20, 10, respectively. The slice data[:, :15, :3] returns a 3D array of shape (3, 10, 3), where the first component corresponds to the three trajectories, the second component corresponds to 10 frames (note that the last 5 frames are being truncated as the other two trajectories only have 10 frames) and the third component corresponds to the selected first three dimensions.

Returns:	Returns an object that allows access by slices in the described manner.

ra_itraj_jagged¶

Behaves like ra_itraj_cuboid just that the trajectories are not truncated and returned as a list.

Returns:	Returns an object that allows access by slices in the described manner.

ra_itraj_linear¶

Implementation of random access that takes arguments as the default random access (i.e., up to three dimensions with trajs, frames and dims, respectively), but which considers the frame indexing to be contiguous. Therefore, it returns a simple 2D array.

Returns:	A 2D array of the sliced data containing [frames, dims].

ra_linear¶

Implementation of random access that takes a (maximal) two-dimensional slice where the first component corresponds to the frames and the second component corresponds to the dimensions. Here it is assumed that the frame indexing is contiguous, i.e., the first frame of the second trajectory has the index of the last frame of the first trajectory plus one.

Returns:	Returns an object that allows access by slices in the described manner.

register_progress_callback(call_back, stage=0)¶

Registers the progress reporter.

Parameters:	call_back (function) – This function will be called with the following arguments: stage (int) instance of pyemma.utils.progressbar.ProgressBar optional args and named keywords (kw), for future changes stage* (int, optional, default=0) – The stage you want the given call back function to be fired.

set_params(**params)¶: Set the parameters of this estimator. The method works on simple estimators as well as on nested objects (such as pipelines). The former have parameters of the form <component>__<parameter> so that it’s possible to update each component of a nested object. :returns: :rtype: self

show_progress¶: whether to show the progress of heavy calculations on this object.

trajectory_length(itraj, stride=1, skip=None)¶

Returns the length of trajectory of the requested index.

Parameters:	itraj (int) – trajectory index stride (int) – return value is the number of frames in the trajectory when running through it with a step size of stride. skip (int or None) – skip n frames.
Returns:	int
Return type:	length of trajectory

trajectory_lengths(stride=1, skip=0)¶

Returns the length of each trajectory.

Parameters:	stride (int) – return value is the number of frames of the trajectories when running through them with a step size of stride. skip (int) – skip parameter
Returns:	array(dtype=int)
Return type:	containing length of each trajectory

transform(X)¶

Maps the input data through the transformer to correspondingly shaped output data array/list.

Parameters:	X (ndarray(T, n) or list of ndarray(T_i, n)) – The input data, where T is the number of time steps and n is the number of dimensions. If a list is provided, the number of time steps is allowed to vary, but the number of dimensions are required to be to be consistent.
Returns:	Y – The mapped data, where T is the number of time steps of the input data and d is the output dimension of this transformer. If called with a list of trajectories, Y will also be a corresponding list of trajectories
Return type:	ndarray(T, d) or list of ndarray(T_i, d)

write_to_csv(filename=None, extension='.dat', overwrite=False, stride=1, chunksize=100, **kw)¶

write all data to csv with numpy.savetxt

Parameters:

filename (str, optional) –
filename string, which may contain placeholders {itraj} and {stride}:
- itraj will be replaced by trajetory index
- stride is stride argument of this method
If filename is not given, it is being tried to obtain the filenames from the data source of this iterator.
extension (str, optional, default='.dat') – filename extension of created files
overwrite (bool, optional, default=False) – shall existing files be overwritten? If a file exists, this method will raise.
stride (int) – omit every n’th frame
chunksize (int) – how many frames to process at once
kw (dict) – named arguments passed into numpy.savetxt (header, seperator etc.)

Example

Assume you want to save features calculated by some FeatureReader to ASCII:

>>> import numpy as np, pyemma
>>> import os
>>> from pyemma.util.files import TemporaryDirectory
>>> from pyemma.util.contexts import settings
>>> data = [np.random.random((10,3))] * 3
>>> reader = pyemma.coordinates.source(data)
>>> filename = "distances_{itraj}.dat"
>>> with TemporaryDirectory() as td, settings(show_progress_bars=False):
...    out = os.path.join(td, filename)
...    reader.write_to_csv(out, header='', delimiter=';')
...    print(sorted(os.listdir(td)))
['distances_0.dat', 'distances_1.dat', 'distances_2.dat']